
How much epoxy for a tumbler?
Tumbler coats are thin: the resin is brushed or spread on while the tumbler turns, so most of it stays on instead of pooling. A common starting point is about 30 ml of mixed epoxy per coat on a 20 oz skinny tumbler, which works out to roughly 2 fluid ounces per square foot.
| Tumbler | Area to coat | Per coat | Mix with 10% extra |
|---|---|---|---|
| 15 oz skinny | about 9.2 × 6.5 in | about 25 ml (0.8 fl oz) | about 27 ml |
| 20 oz skinny | about 9.2 × 8.2 in | about 31 ml (1.05 fl oz) | about 34 ml |
| 30 oz skinny | about 9.67 × 9.5 in | about 38 ml (1.3 fl oz) | about 41 ml |
Starting points. Thicker coats, glitter that soaks up resin, and different resin brands all change the amount. Most tumblers get two or three coats.
With a 1:1 resin, a 20 oz tumbler coat is about 17 ml of part A and 17 ml of part B, including the extra.
How much epoxy for a flat or round surface?
For trays, coasters, artwork and tabletops, the amount depends on the area and the thickness of the coat:
| Coat | Thickness | Epoxy per square foot |
|---|---|---|
| Seal coat | 1/16 in | about 4.8 fl oz |
| Flood coat | 1/8 in | about 9.6 fl oz |
| Thick pour | 1/4 in | about 19.2 fl oz |
The math is linear, so double the thickness means double the resin. A 12 × 12 inch piece (1 square foot) takes about 4.8 fl oz for a seal coat, and a 24 × 36 inch tabletop (6 square feet) takes about 58 fl oz for a 1/8 inch flood coat.
Measuring part A and part B
- Check your resin's ratio. Many craft epoxies are 1:1 by volume, but some are 2:1 or 3:1. The calculator splits the total for you.
- Measure by volume if the ratio is by volume. Some brands give a ratio by weight instead, which is different. Follow your brand's instructions.
- Mix a little extra. Some resin always stays on the cup and stir stick. About 10% extra is a safe start for small batches.
- Don't mix more than you can use. Epoxy has a limited working time once mixed, so for big pieces mix in several smaller batches.
Safety
- Work in a well-ventilated space and wear nitrile gloves.
- Follow your resin's cure times before the next coat and before use.
- Check whether your resin is rated food safe and how long it needs to cure before any contact with drinks. Many crafters keep the lip area free of resin.
Sublimating your tumbler first? Get the template size with the tumbler template calculator, and see sizes for other tumblers in the tumbler template size chart.
Frequently asked questions
How much epoxy do I need for a 20 oz tumbler?
A common starting point is about 30 ml (1 fl oz) of mixed epoxy per coat on a 20 oz skinny tumbler, or about 34 ml with a little extra for the cup. Most tumblers get two or three coats.
How much epoxy for a 30 oz tumbler?
About 38 ml (1.3 fl oz) of mixed epoxy per coat on a typical 30 oz skinny tumbler, or about 41 ml with 10% extra.
How much epoxy resin per square foot?
About 4.8 fl oz per square foot for a 1/16 inch seal coat and about 9.6 fl oz per square foot for a 1/8 inch flood coat. Thicker pours scale up in proportion.
How do I measure a 1:1 epoxy?
Measure equal volumes of part A and part B in a graduated cup, then mix thoroughly for the time your brand recommends. If your resin is 2:1 or 3:1, use that ratio instead, and check whether it's by volume or by weight.
More free tools
Related articles
Last updated 2026-11-07. All calculations run in your browser. Nothing you enter or upload is sent to a server.