
How a DTF gang sheet works
A gang sheet is one long strip of DTF film, usually 22 inches wide, that you fill with as many designs as you can. Printers charge by the length of the sheet, so the goal is simple: fit your designs into as few inches as possible.
The calculator places your designs in rows across the sheet with a gap between them, then works out how many rows your order needs. Many DTF printers ask for at least a quarter inch between designs so each transfer can be cut apart cleanly.
Examples on a 22-inch sheet
| Order | Fit across | Length needed | On one 22 × 60 sheet |
|---|---|---|---|
| 20 adult fronts, 10 × 10 in | 2 | about 102 in | 10 |
| 10 large fronts, 11 × 12 in | 1 | about 112 in | 5 |
| 6 back prints, 12 × 14 in | 1 | about 73 in | 4 |
| 50 left chest logos, 3.5 × 3.5 in | 5 | about 37 in | 80 |
| 25 designs, 4 × 4 in | 5 | 21 in | 70 |
| 100 small logos, 2.5 × 2.5 in | 8 | about 36 in | — |
With 0.25 in between designs and no edge margin. Check your printer's spacing and margin rules.
The 11-inch trap
Look at the second example: an 11-inch-wide design fits only one across a 22-inch sheet, because two of them plus a quarter-inch gap need 22.25 inches. Shrink the design to 10.85 inches or less (10.75 is an easy number to remember) and two fit side by side, which roughly halves the sheet length. The calculator warns you when you're just over a size like this.
Ways to waste less film
- Mix sizes. Fill the space beside large designs with small ones: left chest logos, sleeve prints or extra pocket designs.
- Rotate. A tall design turned sideways sometimes fits more per row. The calculator checks both directions.
- Size designs to the sheet. Widths that divide evenly into 22 inches, minus the gaps, waste the least: about 10.75 in for two across, 7.1 in for three, 5.3 in for four.
- Order the right length. If your order needs 52 inches, a 60-inch sheet leaves room to add a few extras or test prints for free.
Design size and resolution
DTF prints look best from files at about 300 pixels per inch at the final size, so a 10-inch-wide design should be about 3000 pixels wide. Check yours with the DPI checker, and find the right size for each garment and placement with the shirt design size calculator, which works for DTF transfers too.
Frequently asked questions
How many designs fit on a 22 x 60 gang sheet?
It depends on the size. With a quarter inch between designs, about 10 adult front designs of 10 × 10 inches fit on a 22 × 60 sheet, about 70 designs of 4 × 4 inches, or about 80 left chest logos of 3.5 × 3.5 inches.
How much space should I leave between designs on a DTF gang sheet?
Many DTF printers ask for at least 0.25 inch between designs so the transfers can be cut apart cleanly. Check your printer's guidelines.
How wide is a DTF gang sheet?
Most DTF gang sheets are 22 inches wide and sold by length. Some printers also offer narrower sheets, such as 11 or 13 inches.
Why does my 11 inch design only fit one across?
Two 11-inch designs plus a quarter-inch gap need 22.25 inches, which is just over a 22-inch sheet. Make the design 10.75 inches wide and two will fit side by side.
More free tools
Related articles
Last updated 2026-11-07. All calculations run in your browser. Nothing you enter or upload is sent to a server.