Home › Blog › DTF Transfer Size Chart

DTF Transfer Size Chart

Getting the size right matters twice with DTF transfers: once on the shirt, and once on the gang sheet you pay for by the inch. A design that's a quarter inch too wide can double your film. Here are the common sizes for each placement, and how many of each fit on a 22-inch sheet.

By the CraftSizer team · Updated 2026-11-09

DTF transfer size chart on an adult shirt: full front 10 to 11 inches, left chest 3.5 to 4 inches, sleeve 2.5 to 3.5 inches, full back 11 to 12 inches, youth 7 to 9 inches, hat 2.5 to 4 inches
Common DTF transfer sizes for an adult shirt.

DTF size chart by garment

GarmentFull frontLeft chestFull backSleeve
Adult (S–XL)10–11 in3.5–4 in11–12 in2.5–3.5 in
Adult (2XL+)11–12 in3.5–4 in12–13 in3–3.5 in
Women's fitted8–10 in3–3.5 in9–11 in2.5–3 in
Youth7–9 in2.5–3 in8–10 in2–2.5 in
Toddler (2T–5T)5–7 in2–2.5 in6–8 in1.5–2 in
Adult hoodie8–10 in3–4 in10–12 in2.5–3.5 in

Widths in inches. These are common starting points; brands and fits vary, so hold a paper print up to the garment if you're unsure.

Hats: front panel designs are usually 2.5–4 in wide and no more than about 2.25 in tall. Tote bags: about 8–10 in wide on a standard 15 × 16 in tote.

Want the exact height for your design's shape? The shirt design size calculator works for DTF too.

How many fit on a 22 × 60 gang sheet?

Most DTF gang sheets are 22 inches wide and sold by length. With a quarter inch between designs:

DesignSizeFit acrossOn one 22 × 60 sheet
Adult front10 × 12 in28
Adult front11 × 12 in14 (5 if rotated)
Adult back12 × 14 in14
Youth front8 × 9 in212 (14 if rotated)
Toddler front6 × 6 in327
Left chest3.5 × 3.5 in580
Sleeve3 × 3 in6108

No edge margin. Some printers ask for one, which can lower these counts. Try your own sizes in the DTF gang sheet calculator.

The 11-inch trap

An 11-inch-wide front looks like it should fit two across a 22-inch sheet. It doesn't: two designs plus a quarter-inch gap need 22.25 inches. So only one fits per row, and your sheet is about twice as long. Make the design 10.75 inches wide and two fit side by side. Nobody will notice the quarter inch on the shirt.

The same idea works for other sizes: about 7.1 in or less fits three across, and about 5.3 in or less fits four.

Pixel sizes for DTF files

DTF prints look best from files at about 300 pixels per inch at the final size. Multiply the width in inches by 300:

Check whether your image is sharp enough with the DPI checker. Use a transparent background (usually PNG) unless you want the background printed.

Placement tips

Frequently asked questions

What size should a DTF transfer be for an adult shirt?

Most adult full front DTF transfers are 10 to 11 inches wide. 10.75 inches is a popular choice because two fit across a 22-inch gang sheet.

What size is a left chest DTF transfer?

About 3.5 to 4 inches wide on adult shirts, and 2.5 to 3 inches on youth shirts.

What size DTF transfer for a hat?

Usually 2.5 to 4 inches wide and no more than about 2.25 inches tall, to fit the front panel above the brim.

What resolution should a DTF file be?

About 300 pixels per inch at the final print size, so a 10-inch-wide design should be about 3000 pixels wide.

Free tools for this

Free tool

DTF Gang Sheet Calculator

How many designs fit on a DTF gang sheet, how long a sheet you need, and cost per design.

Free tool

HTV Shirt Design Size Calculator

What size to cut your iron-on design for adult, youth, toddler and baby shirts, and where to place it.

Free tool

Sublimation DPI & Print Size Calculator

Convert pixels to inches, find the pixels you need, and check if an image is sharp enough to print.

More articles