Sublimation Paper Size Guide
Before you buy paper, it helps to know what will actually fit on it. Most mug and tumbler wraps fit on ordinary letter paper if you turn them sideways, but a few projects need tabloid. Here's what fits where, how many prints you can get per sheet, and what your printer can handle.
By the CraftSizer team · Updated 2026-11-02

What fits on which paper
| Project | Typical print size | Paper |
|---|---|---|
| 11 oz mug | 8.5 × 3.5 in | Letter, 2 per sheet |
| 15 oz mug | about 9 × 4 in | Letter, often 2 per sheet |
| 20 oz skinny tumbler | about 9.3 × 8.2 in | Letter, using the 11 in side |
| 30 oz skinny tumbler | about 9.77 × 9.5 in | Tabloid (11 × 17) |
| Youth shirt front | 7–9 in wide | Letter |
| Adult shirt front | 9–11 in wide | Tabloid, or letter sideways if under about 8 in tall |
| Mousepad | about 9.25 × 7.75 in | Letter |
Typical sizes. Measure your blank, and remember most printers can't print right to the edge of the sheet.
Turn it sideways: the 11-inch side
A letter sheet is 8.5 × 11 inches. Most wraps are wider than 8.5 inches but shorter than 11, so the trick is to rotate the design 90° and run it along the 11-inch side.
- 11 oz mug: an 8.5 × 3.5 in wrap runs along the 11 in side, and two of them stacked are only 7 inches tall, so you get two mug wraps per sheet.
- 15 oz mug: two 9 × 4 in wraps stack to 8 inches, which fits if your printer's margins are small.
- 20 oz skinny tumbler: a 9.3 × 8.2 in wrap fits along the 11 in side, leaving very little room on the short side. It works on most sublimation printers, but keep the design's important parts away from the edges.
- 30 oz skinny tumbler: at about 9.5 inches tall, the wrap is taller than the 8.5 in side of letter paper, so it needs tabloid (11 × 17).
Paper sizes in inches and pixels
| Paper | Inches | Pixels at 300 DPI |
|---|---|---|
| Letter | 8.5 × 11 | 2550 × 3300 |
| Legal | 8.5 × 14 | 2550 × 4200 |
| Tabloid | 11 × 17 | 3300 × 5100 |
| Super B | 13 × 19 | 3900 × 5700 |
| A4 | 8.27 × 11.69 | 2480 × 3508 |
| A3 | 11.69 × 16.54 | 3508 × 4961 |
Legal paper doesn't help with tall wraps: it's longer than letter, but still only 8.5 inches wide. It's useful for long, narrow prints.
What your printer can print
- Sawgrass SG500: up to 8.5 × 14 in (legal) in the US model. An optional bypass tray takes custom-cut paper up to 8.5 in wide.
- Sawgrass SG1000: up to 11 × 17 in, and up to 13 in wide with the bypass tray (13 × 19 is a common size).
- Converted inkjet printers (such as many EcoTank models): most standard models print letter and legal. Wide-format models print 13 × 19.
If your printer tops out at letter, you can still do mugs, 20 oz tumblers, youth shirts and mousepads. You'll need tabloid for 30 oz tumblers and large adult shirt designs.
Tips to save paper
- Gang small prints together. Put two mug wraps, or several coasters or keychains, on one sheet.
- Leave a small border around each design when you trim, so you have room for heat tape.
- Don't split a wrap across two sheets. A join in the middle of a mug or tumbler shows as a line. Use a larger sheet instead.
- Set the canvas in pixels. Get the exact template size for your blank from the tumbler template calculator or the mug template calculator, then check your image is sharp enough with the DPI checker.
Template sizes for other tumblers are in the tumbler template size chart.
Frequently asked questions
What size sublimation paper do I need for a 20 oz tumbler?
Letter paper (8.5 × 11 in) works for most 20 oz skinny tumblers. The wrap of about 9.3 × 8.2 inches runs along the 11-inch side. Keep important details away from the edges, since there's very little room on the short side.
What size sublimation paper for a 30 oz tumbler?
A 30 oz skinny tumbler wrap is about 9.77 × 9.5 inches, which is taller than the 8.5-inch side of letter paper, so you need tabloid (11 × 17 in) paper.
How many mug wraps fit on one sheet of sublimation paper?
Two 11 oz mug wraps (8.5 × 3.5 in each) fit on one letter sheet when you run them along the 11-inch side. Two 15 oz wraps often fit too if your printer's margins are small.
Can I use legal paper for bigger tumblers?
Not for taller wraps. Legal paper is 8.5 × 14 inches, so it's longer than letter but no wider. A wrap taller than about 8.3 inches needs tabloid paper.