16 oz Glass Can Decal Size Guide
Glass can cups are one of the most popular vinyl projects, and one of the easiest to get wrong: a decal that looks perfect on the mat can wrap out of view or wrinkle at the curves. Here's how big to make a front decal or a full wrap on a 16 oz glass can, and how to adjust for your own design.
By the CraftSizer team · Updated 2026-10-20

Quick answer
| Glass can | Front decal, up to | Full wrap | Good starting width |
|---|---|---|---|
| 16 oz | about 2.9 × 4.1 in | about 8.45 × 4.1 in | 2.5–3 in |
| 20 oz | about 3 × 5 in | about 8.75 × 5 in | 2.75–3 in |
Based on a typical 16 oz can of about 8.7 in around with about 4.6 in of straight side, and a 20 oz can of about 9 in around with 5.5 in of straight side. Brands vary, so measure your can.
Why a front decal stops at about 2.9 inches
A 16 oz glass can is about 8.7 inches around. From the front, you can only see about a third of that clearly, roughly 2.9 inches. A decal wider than that starts to curve away, so the edges of the design look cut off when someone looks straight at the cup.
The height limit comes from the shape of the can. The top and bottom curve in, and vinyl wrinkles on curves. Leave about a quarter inch at the top and bottom of the straight section, which gives about 4.1 inches of usable height.
Sizes for different design shapes
Your design probably isn't the same shape as that 2.9 × 4.1 inch box, so scale it until it fits the box without going past either edge:
| Design shape | Cut size on a 16 oz can |
|---|---|
| Square (logo, monogram) | about 2.9 × 2.9 in |
| Wide (name or short word, 2:1) | about 2.9 × 1.45 in |
| Tall (quote stacked in lines, 1:2) | about 2.05 × 4.1 in |
The cup decal size calculator does this for you. Upload your image and it reads the shape and gives the exact cut size.
Full wrap on a glass can
For a design that goes all the way around, make the wrap about 8.45 × 4.1 inches on a 16 oz can. That's the circumference minus a quarter-inch gap where the two ends meet, so they don't overlap. Patterns (leopard print, florals, coffee beans) are the easiest full wraps, because a tiny mismatch at the seam doesn't show.
Tips so the decal lies flat
- Use permanent adhesive vinyl and wipe the glass with rubbing alcohol first.
- Cut small slits in the transfer tape around the design so it can follow the curve.
- Start pressing from the center of the decal and work outward to push out air.
- Wait about two to three days before washing, and hand wash to make the decal last.
Making a batch? The vinyl yardage calculator shows that twelve 2.9 × 4.1 inch front decals fit in about 18 inches of a 12-inch roll.
Frequently asked questions
What size decal goes on a 16 oz glass can?
A front decal can be up to about 2.9 inches wide and 4.1 inches tall on a typical 16 oz glass can. Most people use a width of 2.5 to 3 inches.
What size is a full wrap for a 16 oz glass can?
About 8.45 × 4.1 inches on a typical 16 oz can: the circumference minus a small gap where the ends meet, and the straight height minus the curved top and bottom.
Why does my vinyl wrinkle on a glass can?
The decal is probably reaching the curved part of the can, or the transfer tape is too stiff. Keep the decal in the straight area and cut slits in the tape so it can follow the curve.